MIL-DTL-28950C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
34 Assemble fronts.
(cont'd)
b. Fold the upper fronts, matching
301
SSa-1
10-14
A
A
the cut edges of the chest and waist
darts, respectively. Stitch the
entire length of the chest and waist
darts, 3/8 inch from the cut edges at
the upper end of the chest darts and
tapering to zero at the lower end of
the waist darts, tapering to zero at
the upper end.
c. Position the upper fronts and side
301
SSa-1
10-14
A
A
body fronts, with the edges even, and
join with a 3/8 inch seam.
d. Spread open the waist dart and the
underarm dart and press flat with a
heated pressing iron. Press the chest
dart flat, turning the cut edges
toward the armhole edge of the fronts.
e. Position the upper and the lower
301
SSa-1
12-16
A
A
fronts with the edges even and join
together at the waist with a 3/8 inch
seam and with the 1/4 inch wide stay
tape positioned on the upper front 1/4
inch from the lower edge and caught in
the stitching.
f. The tape shall be sewn with normal
301
SSa-1
12-16
A
A
tension, not loose or tight, and shall
extend from the center of the side
body front to not more than 3 inches
from the edge of the fronts.
g. Spread open the waist seam and
press flat with a heated pressing
iron.
h. Press and shape the fronts from
the waist to the top edge on a
suitable type heated pressing machine,
shrinking the fronts to eliminate the
excess fullness of the chest without
distortions to the front or armhole of
the coat.
37
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business