MIL-DTL-21083E(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
N
OPERATION
TYPE
TYPE
STCH/IN
NDL
BOB/LPR
O
4 Set pockets and pocket flaps.
1 (cont'd)
a. Mark the fronts in accordance
with the marks on the pattern or
template when used for position of
upper and lower pockets and pocket
flaps ensuring adherence to the
finished appearance requirements.
b. Position the pocket flaps on
the outside of the fronts in
accordance with the marks for the
upper and lower pocket flaps,
respectively. Position the
polyester and cotton twill stay
piece for the flaps and top
corners of the pocket on the
underside of the fronts.
c. Seam the pocket flaps to
the
301
LSq-2
10-14
A
A
front, through the polyester
and
(a)
(silk)
(silk)
cotton twill stay, uniformly
1/8
inch from the serged edge of
the
flap.
d. Turn down the flaps and
301
LSq-2
10-14
A
A
topstitch the flaps 1/8 inch from
(b)
(silk)
(silk)
the raised edge.
e. Position the upper pockets in
301
LSd-1
10-14
A
A
accordance with the marks and seam
(silk)
(silk)
to the fronts uniformly 1/8 inch
from the side and bottom edges.
The top corners of the pockets
shall be securely tacked through
the twill stay pieces.
f. Position the lower pockets in
301
LSbj-1
10-14
A
A
accordance with the marks on the
pattern and with lower edge 1-1/4
inches above bottom edge of
finished coat. Seam bellows of
pockets from the inside to fronts
3/8 inch from side and bottom
serged edges. Securely tack upper
corners of pockets through silesia
stay pieces.
46
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business