MIL-DTL-28919B(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
11
Make belt loops. (see operation
1.e)
Finished appearance. The belt
loops shall be flat without
distortions or raw edges and with
stitching of uniform gage. The
loops shall be of uniform length
and width.
a. Fold the stripping lengthwise
406
EFh-1
10-14
0
0
towards the center, abutting the
raw edges. Join the abutted edges
with combination covering stitch on
the underside and a row of stitches
uniformly 1/16 inch from folded
edges of the stripping. The
stripping shall finish 5/16 to 3/8
inch wide.
- or -
b. Fold the stripping lengthwise
105
EFae-1
10-14
0
0
turning the raw edges and abutting
the turned under edges at the
center. Join the abutted edges
with a covering stitch.
- or -
c. Turn under one side of the
105
EFae-1
10-14
0
0
stripng; fold the stripping
lengthwise, overlapping the turned
under edge on the raw edge at the
center. Join the lapped edges with
a covering stitch.
12
Make watch pocket (style A only).
Finished appearance. The watch
pocket bearer and watch pocket
halves shall be properly positioned
and serely sewn without pleats,
puckers, and other distortions.
a. The watch pocket shall be made
of two pieces of pocketing material
and a bearer of one ply of basic
material.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business