MIL-DTL-28919B(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
16
Attach hip pocket, flaps and label.
(cont'd)
g. Turn flap down and raise stitch
301
LSq-2
10-14
0
0
through all plies, 1/16 inch from
(b)
or
or
joining seam, closing top of
(show
50/3
50/3
pocket.
finished
seams)
h. Position the combination
301
LSbj-1
10-14
50/3
50/3
personal-identification-size-
instruction label on the top of the
right pocketing so that on the
finished trousers it will face the
wearer. No part of the label
printing shall be covered by the
waistband interlining curtain.
Stitch the label on all four sides
1/16 to 3/32 inch from edges.
Stitching shall not be through
printing.
- or -
i. Stitch top edge of combination
301
LSa-1
10-14
0
0
personal-identification-size-
or
or
instruction label to the lower edge
50/3
50/3
of the waistband lining above the
right hip pocket. The ends of
stitching need not be tacked
provided the stitching extends at
least 1/2 inch beyond each side of
label.
j. Securely bartack both ends of
301
SSa-1
10-14
50/3
50/3
the pocket opening through all
(each
plies of material.
end)
- or -
k. Operations 5.c, 16.a, 16.b and
101
10-14
50/3
16.c may be accomplished on an
or
automatic machine which sets the
A/3
flap, stitches, cuts and turns cord
facing in one operation. When this
machine is used, the bearer may be
trimmed to permit insertion into
machine and the recommended pocket
stay material may be used.
- and -
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business