MIL-DTL-28919B(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
22 Attach waistband and set belt
loops. (cont'd)
One on the seat seam (see
operations 32.c and d).
a. The waistband shall be made of
301
SSa-1
10-14
50/3
50/3
one ply of basic material. Stitch
right and left waistbands to
trousers with 3/8 inch seam,
catching the ends of belt loops
(except center back loop, see
operations 34.c and d).
b. Spread open waistband seam and
press smooth and flat with a heated
iron or pressing machine.
NOTE: The waistband lining may be
attached to the waistband
(operation 12) prior to setting to
trousers.
23
Join lining to waistband.
a. Turn back right fly lining and
301
SSe-2
10-14
50/3
50/3
stitch top end to front and top
(a)
edges to waistband.
(each
edge)
b. Turn back the end of the left
301
SSa-1
10-14
50/3
50/3
waistband in line with the joining
seam of the left fly to front and
stitch across top edge of waistband
the width of the fly.
c. Insert top edge of waistband
304
10-14
50/3
50/3
be- tween lining and buckram
or
waistband interlining with edge of
404
10-14
50/3
70/2
lining turned in, and join all
or
plies with a row of imitation
Hand
10-14
50/3
handfelled stitches.
d. Left end of waistband lining
shall finish at front edge of trou-
sers, with the end of the waistband
lining trimmed slightly back from
front edge on an angle. Right end
of waistband lining shall extend
approximately 1 inch under the fly
lining in the finished trousers.
25
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business