MIL-DTL-28919B(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
13
Make and join waistband lining.
(cont'd)
c. Position stabilizer on outer-
301
SSa-1
6-10
50/3
50/3
lining with one edge of stabilizer
and free edge of interlining even.
Stitch stabilizer to interlining
1/2 inch from edge.
d. A commercial waistband lining/
interlining conforming to specified
requirements may be used (see
operation 1.i).
14
Seam crotch lining to fronts.
(see
operation 4.d)
a. Fold crotch lining lengthwise
301
SSa-1
6-10
50/3
50/3
to form a double thickness and seam
or
to fronts or attach to fronts in
503
EFd-1
6-10
70/2
70/2
overedge operation.
or
504
EFd-1
6-10
70/2
70/2
15
Seam darts in back.
Finished appearance. The darts
shall be properly positioned and
finished without pleats, puckers,
gathers or other distortions. In
the finished trousers, the darts
shall be well tapered to a flat
point and the tapered end shall
finish within the hip pocket at the
upper edge.
a. Fold the backs, matching the
301
SSa-1
10-14
50/3
50/3
cut edges of the waist darts.
Stitch lengthwise along the entire
length of the darts, starting 3/8
inch from the cut edges at the top
end and tapering to a point at the
lower end as indicated by marks on
the pattern.
b. Spread open and press darts
smooth and flat with a heated
pressing iron or pressing machine.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business