MIL-DTL-28919B(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
4
Overedge stitch trousers.
(cont'd)
c. Overedge stitch crotch seam,
502
EFd-1
6-10
70/2
70/2
seat seam and raw edge at the left
or
end of waistband.
503
EFd-1
6-10
70/2
70/2
or
504
EFd-1
6-10
70/2
70/2
d. The folded crotch lining may be
301
SSa-1
10-14
50/3
50/3
stitched to the foreparts in a
separate operation (see oper. 13).
NOTE: When a knife is used on
serging (overedge stitching)
machine, the gage shall be set so
that the raveled ends are trimmed
but the edge of the fabric is not
cut off.
5
Set hip pocket bearer.
Finished appearance. The hip
pocket bearer shall be properly
positioned, uniformly and securely
sewn with stitching of uniform gage
and without pleats, puckers or
other distortions.
a. The hip pocket bearers shall
each be a single ply of basic
material.
b. Position the bearer on the
pocketing material in accordance
with notches as indicated by marks
on the pattern.
c. Fold under the lower edge of
301
LSdl-1
10-14
50/3
50/3
the hip pocket bearer uniformly 1/4
or
to 3/8 inch and stitch to the
301
LSdj-1
10-14
50/3
50/3
pocket 1/16 to 1/8 inch from the
(selvage
folded edge. When bearer is cut on
)
selvage, the edge need not be
turned under.
6
Set side pocket bearer and facing.
Finished appearance. The side
pocket bearer and facing shall be
properly positioned and securely
sewn with stitching of uniform gage
and without pleats, puckers or
other distortions.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business