MIL-DTL-28919B(MC)
of DDD-L-20. The content (inscription) and format of the
combination label shall be as follows:
Nomenclature:
Trousers, Men's
Fiber Content: 55% Polyester/45% Wool (Example)
Size: 38R (Example)
Name of contractor:
DRY CLEAN ONLY
3.4. Design. The trousers shall be the U.S. Marine Corps design
as shown on Figure 1 having a two-piece, lined waistband with
hook and eye closure and outlet at seat seam; french type fly
with slide fastener; seven belt loops; straight side pockets; hip
pockets with pocket flaps to button; outlet from crotch to knee
at inseam and unfinished leg bottom.
3.5. Patterns. Standard patterns will be furnished to the
contractor by the Government. The standard patterns shall not be
altered in any way and shall be used only as a guide for cutting
the contractor's working patterns. The contractor's working
patterns provide an allowance of 1/4 inch for pocket flaps, and a
3/8 inch seam allowance for all other seams except as otherwise
stated operation.
3.5.1 Pattern parts. The component parts for the trousers shall
be cut from the materials specified herein in accordance with the
number of pattern parts indicated below, except belt loops and
waist band lining/interlining.
ITEM
PATTERN NOMENCLATURE
NO. OF CUT PARTS
Material:
Basic
1
Front
2
2
Back
2
3
Right fly
1
4
Left fly
1
5
Side pocket wide facing (bearer)
2
6
Side pocket narrow facing
2
7
Hip pocket bearer
4
8
Hip pocket flap
2
9
Waistband
2
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business