MIL-DTL-28919B(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
17
Attach watch pocket.
(cont'd)
d. In the finished trousers the
notches for the pocket opening
shall not be exposed and the edge
of the opening shall meet the lower
edge of the waistband. The pocket
opening (after bartacking) shall be
2-7/8 + 1/8 inches and the depth of
the pocket shall be 3-3/4 + 1/4
inches.
18
Join fly assembly to fronts.
Finished appearance. The seam
join- ing the fly assembly to the
fronts shall be without pleats,
puckers, twists or other
distortions.
a. Position left fly assembly on
301
SSe-2
10-14
50/3
50/3
outside of left front with edges
(a)
even and notches matching. Join
left fly to front with 1/4 inch
seam.
b. Raise stitch the joining seam
301
LSq-2
10-14
50/3
50/3
on left fly assembly 1/16 inch from
(b)
seam, catching all plies of the
seam.
c. Position right fly assembly on
301
LSq-2
10-14
50/3
50/3
the right front with edges even and
(a)
notches matching. Join right fly
to front with 1/4 inch seam.
d. Press right fly seam open and
flat with heated pressing iron with
the fastener tape facing towards
side seam.
19
Attach side pockets.
Finished appearance. The edges of
the pocket openings shall finish
smooth and flat without distortion.
Pocket openings shall be of uniform
appearance. The bottom front
corners of the pockets shall be
backstitched. Care shall be taken
to avoid notching the pockets on
the under side beyond the width of
the side seam outlet.
22
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business