MIL-DTL-28950C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
70 Make buttonholes.
(cont'd)
c. Care shall be exercised when
making the buttonhole in the waist
seam so that the seam does not come
open beyond the ends of the
buttonhole.
d. Securely bartack the end of each
Bartack
21 per
A
A
buttonhole and trim the ends of the
bartack
(silk)
(silk)
gimp.
71 Make eyelets in pockets.
Finished appearance. The eyelets
shall be worked with the purling on
the outside of the pocket and shall
finish with a 1/8 inch diameter
opening. All stitches shall be
securely caught in the fabric.
a. Make one eyelet in each pocket for
Eyelet
21 per
A
A
removable insignia button to
eyelet
(silk)
correspond with eyelet end of
buttonhole in flaps so that when
buttoned on the finished coat, flaps
shall be smooth and flat without
twists or bulges.
72 Sew hook and eye to collar.
Finished appearance. The hook and eye
shall be positioned to properly engage
each other, effecting a flat, smooth
closure at the front of collar without
misalignment or gap.
a. Position and securely sew the hook
Hand
10 per
C
to the right end and the eye to the
hook
(silk)
left end of the collar.
and eye (double
(min) thread)
73 Finish collar.
a. Securely tack the lower corners of
Hand
8-10
C
the collar to the coat.
(silk)
b. Turn under the end and top edge of
Hand
8-10
C
the lining at the right end of the
(silk)
collar and position the folded edge of
the lining under the hook. Fell the
folded end of the collar lining to the
end of the collar and continue felling
along the top folded edge to the end
of the stitching, joining the lining
to the collar.
56
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business