MIL-DTL-28950C(MC)
1/ When threads are purchased in the form of cones or spools and
on bobbins, thread from each shall be tested.
4.4.2 In-process inspection. Inspection shall be performed
during the manufacturing of the end item to ascertain that the
operations are performed as specified herein. The Government
reserves the right to determine the acceptability of construction
methods not performed in accordance with the specified
requirements for operations or subassemblies.
4.4.3 Examination of the end item. Prior to the formation of a
lot and as a final step in the contractor's production control
plan, each coat shall be buttoned on a model form and examined
for those defects identified by an asterisk (*) and listed as
selected defects in MIL-STD-1490. Any coat containing a selected
defect shall not be included in the end item lot.
4.4.4 Finished measurement examination. The provisions for the
finished measurement examination of the finished coat shall be as
specified in MIL-STD-1490 and Table II and Table III of this
specification.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by
the Inventory Control Point's packaging activity within the
Military Department of Defense Agency, or within the Military
Department's Systems Command. Packaging data retrieval is
available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1. Intended use. The coat covered by this specification is
intended to be worn by male officers of the U.S. Marine Corps.
65
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business