MIL-DTL-28950C(MC)
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the test
conditions specified in MIL-STD-1490.
4.3. First article inspection. When first article is required,
inspection of the first article shall be made of a completely
fabricated coat for all provisions of this specification.
4.4. Conformance inspection.
4.4.1 Testing of components. Testing of components shall be in
accordance with the applicable subsidiary specifications and
standards to the extent applicable, except that this
specification shall govern in the event of conflict. The methods
of testing shall be as specified in FED-STD-191, wherever
applicable. Testing shall be performed on components listed in
Table IV for characteristics noted.
63
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business