MIL-DTL-28950C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
b. Mark each shoulder for the
location of one 27-line insignia
button to properly engage with the
buttonhole in the shoulder straps in
order that the straps shall lie smooth
and flat without twisting or bulging
on the finished coat.
c. Mark the sword slit patch for the
location of one 22-line sewing hole
button to properly engage with
buttonhole in tab.
d. Mark the collar lining for the
location of five 16-line sewing hole
buttons to properly engage with
buttonholes in white collar worn with
coat.
77 Attach and sew on buttons.
Finished appearance. The buttons
shall be securely attached and sewn to
the coat and shall properly engage
buttonholes in left front, shoulder
straps, sword slit buttonhole tab and
upper and lower pocket flaps. The
insignia buttons on the front shall
finish with the head of the eagle in
an upright position. The shoulder
buttons shall finish with the head of
the eagle towards the collar. When
coat is buttoned, the center of those
buttons between the upper pockets
shall be midway between the front edge
of the pockets.
a. Attach one 27-line insignia button
to each pocket with shank of button
inserted through eyelets and secured
by ring toggles.
77 Attach and sew on buttons.
(cont'd)
b. Sew one 40-line insignia button at
101
21 per
24/4
each of the marks on the right front,
or
button
except at the waist. The button shall
301
21 per
24/4
24/4
be sewn through all plies of material
or
button
with the head of the eagle in an
Hand
6-8 per
24/4
upright position.
button
(double
thread)
59
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business