MIL-DTL-28920C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM
STCH
/
BOB/
NO
OPERATION
TYPE
STCH
STCH/I
NDL
LPR
TYPE
N
18
Attach hip pocket, flaps, and
label. (cont'd)
h. Position the combination
301
LSbj-1
10-14
40/3
40/3
personal-identification-size-
instruction label on the top of the
right pocketing so that on the
finished trousers it will face the
wearer. No part of the label
printing will be covered by the
waistband interlining curtain.
Stitch the label on all four sides
1/16 to 3/32 inch from edges.
Stitching shall not be through
printing. Stitch top edge of the
combination
personal-identification-
size-instruction label to the lower
edge of the waistband lining above
the right hip pocket. The ends of
stitching need not be tacked
provided the stitching extends to
at least 1/2 inch beyond each side
of label.
i. Securely bartack both ends of
301
SSa-1
10-14
40/3
40/3
the pocket opening through all
(each
plies of material.
end)
- or -
j. Operations 5.c, 18.a, 18.b, and
101
10-14
40/3
18.c, may be accomplished on an
or
automatic machine which sets the
A/3
flap, stitches, cuts, and turns
cord facing in one operation. When
this machine is used, the bearer
and cord facing may be trimmed to
permit insertion into the machine
and the recommended pocket stay
material may be used.
k. Raise stitch the joining seam
301
-
10-14
A
A
of the lower edge of pocket opening
or
or
through back of trousers and cord
40/3
40/3
facing only. Raise stitch the back
at upper edge of pocket opening
through all plies, closing the top
of the pocket. Securely tack both
ends of pocket openings.
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business