MIL-DTL-28920C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM
STCH
/
BOB/
NO
OPERATION
TYPE
STCH
STCH/I
NDL
LPR
TYPE
N
25
Sew waistband and belt loops to
trousers.
Finished appearance. The waistband
shall be seamed to the trousers
smoothly and neatly without
fullness, gathers, or pleats. The
belt loops shall be properly
inserted and correctly positioned
with the ends securely caught in
the waistband stitching.
25
Sew waistband to belt loops and
trousers. (cont'd)
a. The waistband shall be made of
one ply of basic material.
b. Seam waistband to trousers 3/8
301
SSa-1
12-16
A
A
inch from edge, with end of belt
loops inserted in seam at correct
positions and securely caught in
the stitching (except center back
loop).
c.
Position belt loops as follows:
(1) One loop in center of right
and left fronts and backs according
to notches on patterns.
(2) Side loops on the backs
with front finished edge even with
outseams.
(3) Stitch the loop for the
center back of the trousers after
the back is joined at the seat
seam.
d. The raw right front ends of the
waistband shall extend 1/4 to 3/8
inch beyond the front edge of the
right fly. The left front ends of
the waistband shall finish even
with the back edge of the left fly.
The raw right and left back ends of
the waistband shall finish even
with the edges of the back.
Press waistband seam.
26
a. Press waistband seam open and
flat with a heated pressing iron or
pressing machine.
25
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business