MIL-DTL-28920C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM
STCH
/
BOB/
NO
OPERATION
TYPE
STCH
STCH/I
NDL
LPR
TYPE
N
Seam crotch lining to fronts.
16
a. The crotch lining shall consist
of lining material and shall extend
not less than 1 inch above fly
notch.
b. Fold crotch lining lengthwise
301
SSa-1
12-16
A
A
to form a double thickness and seam
or
to fronts or attach to fronts in
503
EFd-1
6-10
70/2
70/2
the overedge operation.
or
504
Seam darts in back.
17
Finished appearance. The darts
shall be properly positioned and
finished without pleats, puckers,
or gathers. In the finished
trousers, the darts shall be well
tapered to a flat point at lower
end and shall extend to the pocket
opening.
a. Fold the backs, matching the
301
SSa-1
12-16
A
A
cut edges of the waist darts. Seam
lengthwise along the entire length
of the dart, starting 3/8 inch from
the cut edges at the top end and
tapering to a point at the lower
end as indicated by marks on
patterns.
b. Spread open and press darts
smooth and flat with heated
pressing iron or pressing machine.
18
Attach hip pocket, flaps, and
label.
Finished appearance. The pockets
shall finish smooth and flat
without bulkiness, bulges, or other
distortions on the outside of the
finished trousers. The stitching
shall be uniform and secure. The
pocket openings and flaps shall be
in proper alignment.
a. Position pocket flaps on the
301
LSg-2
10-14
40/3
40/3
outside of the back, in line with
(a)
the mark as indicated by pattern
and with the pocketing on the under
side. Stitch through all plies
3/16 to 1/4 inch from the mark.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business