MIL-DTL-28902C(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Make waistband lining.
13
(cont'd)
b. Overlap lining material on
301
LSa-1
6-10
40/3
40/3
buckram 3/4 inch and stitch 1/8 to
or
3/16 inch from edge of lining
401
material. Fold lining material
over buckram and press.
- or -
c. Use a commercial, buckram
inter- lined, waistband lining,
provided the furnished lining
conforms to specification
requirements.
14 Seam crotch lining to fronts.
a. The crotch lining shall consist
of lining material and shall extend
not less than one inch above fly
notch.
b. Fold crotch lining lengthwise
301
SSa-1
12-16
A
A
to form a double thickness and seam
or
to fronts or attach to fronts in
503
EFd-1
6-10
70/2
70/2
the overedge operation.
or
504
15 Seam darts in back.
Finished appearance. The darts
shall be properly positioned and
finished without pleats, puckers,
or gathers. In the finished
trousers, the darts shall be well
tapered to a flat point at lower
end and shall extend to the pocket
opening.
a. Fold the backs, matching the
301
SSa-1
12-16
A
A
cut edges of the waist darts. Seam
lengthwise along the entire length
of the dart, starting 3/8 inch from
the cut edges at the top end and
tapering to a point at the lower
end as indicated by marks on
patterns.
b. Spread open and press darts
smooth and flat with heated
pressing iron or pressing machine.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business