MIL-DTL-28902C(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
b. Place the left and right
assemblies together with the edges
of the crotch seam aligned with the
waistband on the left assembly,
aligned with the waistband on the
right assembly at the fly opening,
and with the notches at the lower
end of the flies matching.
30 Joint crotch and seat seam.
(cont'd)
c. Join the left and right
401
SSa-2
10-14
A
A
assemblies at the crotch and seat
seam from the fly notch to a point
1/2 to 3/4 inch from the top of the
finished waistband and two rows of
stitches not more than 1/32 inch
apart, forming a 1/2 inch V-shaped
opening at back. The left and
right assemblies shall be joined at
the crotch with a 1/2 inch seam.
d. Fold back waistband lining over
301
SSa-1
12-16
A
A
the joining seat seam and single
(each
stitch each end of the outlet 1/4
end)
inch from seat seam, with the lower
corner diagonally folded and caught
in the stitching. Turn and force
out upper corners.
31
Assemble slide fastener.
a. Attach slider and securely
staple bottom of fastener together
with the ends of the chain even and
the head of the staple towards the
outside.
32
Press seams (with heated pressing
iron or pressing machine).
Finished appearance. The seams
shall finish smooth and flat
without pleats, puckers or twists.
a. Spread open the seat and crotch
seams from top of waistband to fly
notch and press smooth and flat.
23
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business