MIL-DTL-28902C(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Attach hip pocket, flaps and label.
16
(cont'd)
m. On the finished trousers, the
pocket flaps shall be 2-1/4 + 1/4
inches at center, measured from
seam to center point.
17
Joint fly assembly to fronts.
Finished appearance. The seam
joining the fly assembly to the
front shall be without pleats,
puckers, twists, or other
distortions.
a. Sew on left fly with 3/8 inch
301
SSa-1
12-16
A
A
seam with notches matching.
b. Turn left fly to the inside
with joining seam 1/8 inch back of
folded edge and press front edge
without damage to the fastener.
c. Sew on right fly with 3/8 inch
301
LSq-2
12-16
A
A
seam with notches matching.
(a)
d. Press right fly seam open and
flat with heated pressing iron with
the fastener tape facing towards
side seam.
18
Join outseams.
Finished appearance. The outseams
shall be joined with notches
matching and abutted to the corded
edge of the white stripe.
a. Insert the corded edge of the
301
SSa-1
10-14
30/3
30/3
white stripe between the edges of
or
the trousers outseam with the
401
10-14
30/3
30/3
outseam abutted to the cord edge,
and join with a 3/8 inch seam.
b. Spread open the outseams from
top edge of trousers to bottom and
press smooth and flat with a heated
pressing iron or pressing machine.
18
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business