MIL-DTL-28902C(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Overedge stitch trousers.
4
(cont'd)
a. Overedge stitch the inseam and
503
EFd-1
6-10
70/2
70/2
or
outseam of front trouser, also the
fly edge of right front. The
504
overedge stitching of the inseam of
left front shall extend from bottom
of trouser to fly notch.
b. Overedge stitch inseam and
503
EFd-1
6-10
70/2
70/2
outseam of back part of trousers.
or
504
c. Overedge stitch crotch seam,
503
EFd-1
6-10
70/2
70/2
seat seam and raw edge at the left
or
end of waistband.
504
5
Set back pocket bearer.
Finished appearance. The pocket
bearer shall be properly positioned
and securely sewn with stitching of
uniform gage and without pleats,
puckers or other distortions.
a. The back pocket bearers shall
each be a single ply of basic
material.
b. Position the bearers on the
pocket material in accordance with
notches as indicated by marks on
the pattern.
c. Fold under the lower raw edge
301
LSd-1
12-16
A
40/3
of bearers 1/4 to 3/8 inch and
or
stitch to the pocket 1/16 to 1/8
LSbj-1
inch from the folded edge. A
selvage edge need not be turned.
6
Make back pocket flaps.
Finished appearance. The flaps
shall finish smooth and flat,
without twists, pleats, or puckers
and shall be uniform in shape and
size in accordance with patterns.
The lining shall not be exposed on
the outside. The edges of the
flaps shall be well forced out and
the edges titching shall be uniform
in width. The buttonholes shall be
correctly positioned, clean-cut and
well-made, and the stitching
secure- ly caught in the basic
material.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business