MIL-DTL-28902C(MC)
3.5.1 List of pattern parts. The component parts for the
trousers shall be cut from the specified materials in accordance
with the pattern parts indicated below:
ITEM
PATTERN NOMENCLATURE
NO. OF CUT PARTS
Material:
Basic
1
Front
2
2
Back
2
3
Right fly
1
4
Left fly
1
5
Hip pocket cord
2
6
Hip pocket bearers
2
7
Flap, hip pocket
2
8
Waistband
2
9
Buttonhole tab
2
Material:
Cloth, twill or plain weave polyester
10
Hip pocket
2
11
Crotch lining
2
12
Left fly interlining
2
13
Right fly lining
1
14
Hip pocket flap lining
2
15
Waistband lining
2
Material:
Cloth, buckram, cotton
16
Waistband interlining
2
3.6. Construction.
3.6.1 Manufacturing requirements. The trousers shall be
manufactured in strict accordance with the operations and the
stitch, seam, and stitching types specified in Table I. The
supplier is not required to follow the exact sequence of the
operations listed in Table I but all operations specified shall
be used to manufacture the trousers.
3.6.1.1. Stitches, seams and stitchings. The stitch, seam, and
stitching types specified in Table I shall conform to
FED-STD-751.
3.6.1.2. Overedge stitching. Overedge or serge stitching shall
be done on serging machines with knife attachment properly set to
trim the raw edge when overedged without cutting the material.
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business