MIL-DTL-28902C(MC)
shall show good fastness to light when tested as specified in
applicable thread specifications.
3.3.8 Buttons. Buttons for the back pockets and fly tab closure
shall conform to type II, class D, glossy finish, style 4, 22
line of V-B-871. The color of the buttons shall be blue, shade
BV, cable No. 62003 (see DoD Standard Shades for Buttons 1966).
3.3.9 Labels. Each pair of trousers shall have a combination
identification-size-instruction label. The combination label
shall conform to type VI, class 14 of DDD-L-20. The label shall
conform to the colorfastness and writing test requirements of
DDD-L-20. The content (inscription) and format of the
combination label shall be as follows:
Nomenclature:
Fiber Content:
Size:
Contract number:
Name of contractor:
DRY CLEAN ONLY
3.4. Design. The trousers shall be the U.S. Marine Corps design
as shown on Figure 1, having a two-piece lined waistband with
hook and eye closure and outlet at center back, french-type fly
with slide fastener closure, seven belt loops, two back pockets
with flaps to button, and hip darts. The trousers shall have
ornamental scarlet and white stripes at the outseams.
3.5. Patterns. Standard patterns will be furnished to the
contractor by the Government. The standard patterns shall not be
altered in any way and shall be used only as a guide for cutting
the contractor's working patterns. The contractor's working
patterns shall be identical to the standard patterns. The
standard patterns provide a 1/2 inch allowance for crotch seam
and 3/8 inch allowance for all other seams, except as otherwise
specified herein, and seat seam outlet at waist in accordance
with patterns. The patterns provide a three inch allowance for
bottom turnup of legs. The standard patterns show size,
directional lines for cutting, and are marked and notched for
proper placement and assembly of the component parts.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business