MIL-DTL-28950C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
11 Make lower pockets.
Finished appearance. The binding
shall be uniformly stitched and shall
not be tight or full causing puckers,
gathers, or pleats. The basic
material and both edges of binding
shall be securely caught in the
stitching. The pockets shall be
uniform in shape and size in
accordance with finished pocket
shaper.
a. Overedge stitch the raw edges of
503
SSa-1
6-10
A
A
sides, bottom corners and bottom of
or
pockets.
504
b. Bind the upper edge of the pockets
301
BSc-1
10-14
A
A
with 1 to 1-1/8 inch wide bias
binding, with both edges of binding
turned under and caught in the
stitching 1/16 inch from the inner
folded edges of the binding.
c. Seam lower corners of pockets 3/8
301
SSa-1
10-14
A
A
inch from the serged edges.
d. Spread open the corner seams of
pockets and press smooth and flat with
a heated pressing iron.
e. Trim the corners and turn pockets,
301
OSf-1
12-16
A
A
working out the corners completely.
(silk)
(silk)
Turn under side and bottom edges of
pockets to form bellows, and topstitch
uniformly 1/8 inch from folded edges.
f. Press entire pocket smooth and
flat with a heated pressing iron or
pressing machine, evenly creasing the
edges.
g. The pockets shall be uniform in
shape and size in accordance with the
finished pocket shaper.
23
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business