MIL-DTL-21083E(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
N
OPERATION
TYPE
TYPE
STCH/IN
NDL
BOB/LPR
O
Sew on buttons.
8
8
Finished appearance. The buttons
shall be securely sewn to the coat
and shall properly engage
buttonholes in left front,
shoulder straps and upper and
lower pocket flaps. The insignia
buttons on the front and pockets
shall finish with the head of the
eagle in an upright position. The
shoulder buttons shall finish with
the head of the eagle towards the
edge of the collar. When the coat
is buttoned, the center of those
buttons between the upper pockets
shall be midway between the front
edge of the pockets.
101
21 per
20/4
a. Sew one 40-line insignia
button
button at each of the marks on the
or
301
21 per
20/4
right front, except at the waist.
button
The button shall be sewn through
or
20/4
Hand
4-6 per
all plies of material with the
button
head of the eagle in an upright
(double
position.
thread)
b. Sew one 34-line sewing hole
101
21 per
20/4
button at the waist mark on the
or
button
right front through all plies,
301
21 per
20/4
20/4
necking the button for shank
or
button
wrapping.
Hand
6-8 per
20/4
button
(double
thread)
c. Shank warp the 34-line sewing
Hand
4 wraps
20/4
hole button.
(double
or
thread)
Machin
32
20/4
e
stitche
s per
shank
d. Attach one 27 line insignia
101
21 per
24/4
button to each pocket with shank
or
button
24/4
24/4
of buttons inserted through
301
21 per
eyelets and secured by ring
or
button
toggles.
Hand
4-6 per
24/4
button
(double
thread)
74
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business