MIL-DTL-21083E(MC)
TABLE V.
Form measurements.
1/
Coat size
Form size
Chest
Waist
Seat
(inches)
(inches)
(inches)
(inches)
(inches)
36
34
36
30
36
38
36
38
32
38
40
38
40
34
40
42
40
42
36
42
44
42
44
38
44
46
44
46
40
46
1/ Tolerance of 1/2 inch in all form measurements.
4.4.3 Finished measurement examination. The provisions for the
finished measurement examination of the finished coat shall be as
specified in MIL-STD-1490 and Tables II and III of this
specification.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by
the Inventory Control Point's packaging activity within the
Military Department of Defense Agency, or within the Military
Department's Systems Command. Packaging data retrieval is
available from the managing Military Department's or Defense
Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or
explanatory nature that may be helpful, but is not mandatory.)
6.1. Intended use. The coat covered by this specification is
intended to be worn by male officer personnel of the U.S. Marine
Corps.
6.2. Acquisition requirements.
Acquisition documents must
specify the following:
80
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business