MIL-DTL-82189C(MC)
for fronts and back patches, conforming to type I, style 3, class
A, subclass 1 of MIL-DTL-3461.
3.3.16.2.Ring toggle. Ring toggles for securing the 27-line
buttons to ornamental sleeve patches and the 40-line buttons to
the fronts and ornamental back panel shall conform to
MIL-DTL-3461.
3.3.17 Collar closure for hook and eye. The hook and eye for
closing the collar shall be brass, black japanned finish or black
chemical finish followed by a clear lacquer coating and conform
to the requirements of Figure 13.
3.3.17.1.Eyelets. The eyelets for the collar shall be brass,
rolled flange type, with barrel scored 6 to 8 scores. The
eyelets shall conform to MIL-E-20652, sheet 1A-BE108 and be
enameled in a black shade.
3.3.18 Labels. Each coat shall have a combination
instruction/identification label and a size label as follows.
The coat is intended to be wet (dry) cleaned and the labels shall
show fastness to wet (dry) cleaning.
3.3.18.1.Combination instruction/identification label. The
combination instruction/identification label shall conform to
type VI, classes 1 and 3 (combined) of DDD-L-20 except all
printing and the space between the lines of printing shall be
minimum 10 point (approximately 1/8 inch). The content and
format shall be as follows:
Nomenclature: (item description)
Contract number:
Date:
Name of contractor:
Wool Products Act information:
DRY CLEAN ONLY
3.3.18.2.Size label. The size label shall conform to type VI,
class 2 of DDD-L-20. The label shall consist of the numerical
size designation specified in 1.2 followed by the letters S
(short), R (regular), L (long), or XL (extra long), as shown by
the following example:
40R
9
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business