MIL-DTL-82189C(MC)
TABLE I. Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
3
Shade marking.
a. Mark or ticket (see 3.6.1.3)
all component parts cut from one
piece of basic and lining
materials, and pairs of sleeve
linings when cut from ends, to
insure uniform shade and size
throughout the coat.
b. The use of tickets with any
metal fastening devices is
prohibited on the rayon lining.
4
Make coat hanger and lining
securing straps.
Finished appearance. The coat
hanger and lining securing straps
shall finish 1/4 to 3/8 inch wide.
a. Fold the 1-1/8 inch wide strip
301
EFp-1
12-16
A
A
of lining material in half length-
wise. Turn the edges to the inside
and seam 1/16 inch from the turned
edges.
b. Cut the coat hanger 3-3/4 + 1/4
inches long.
c. Cut the lining securing straps
4-1/2 + 1/4 inches long.
5
Make collar eyelet covers.
Finished appearance. The collar
eyelet covers shall finish 1-3/4 +
1/8 inches wide.
a. Turn under the side edges of
301
EFa-1
12-16
A
A
the collar eyelet covers. Stitch
(each
1/16 to 1/8 inch from the folded
side
edges, catching the turned under
edge)
portions in the stitching.
b. Fold each cover in half across
301
SSa-1
12-16
A
A
the width. Seam 1/16 to 1/8 inch
from the folded side edges.
6
Make underarm shields.
Finished appearance. The shields
shall be finished smooth and flat
without puckers, pleats, gathers,
or other distortions.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business