MIL-DTL-82189C(MC)
coat shall be cloth, rayon twill, black, shade 2604 for class 1
and scarlet, shade 2506 for class 2, conforming to class 1 of
MIL-C-368.
3.3.3 Cloth, twill or plain weave polyester. The stays for the
armhole and shoulder seams, reinforcement pieces for the collar
eyelets, bindings for the lower edge of the collar, and neck edge
of the coat front interlinings shall be cut from cloth, polyester
or polyester blend, conforming to A-A-52106, except the
requirement for non-fibrous material and seam efficiency shall
not apply. The polyester or polyester blend shall be khaki,
shade 3707 for the armhole and shoulder seam stays, the collar
eyelet reinforcement pieces and the binding for the neck edge of
front interlining; and black for the binding for the lower edge
of the collar interlining.
3.3.4 Collar interlining. The material for the collar
interlining shall be cloth, cotton, buckram, double texture,
laminated, starch finish, natural color, conforming to type IV of
A-A-50186. The weight of the laminated cloth shall be 21 to 23
ounces per square yard.
3.3.4.1. Plastic. The plastic strip used in the collar
interlining shall be clear plastic stock, 0.020 inch thick.
It
shall be cut using the cotton buckram pattern.
3.3.4.2. Plastic interlining. The plastic interlining must
withstand wet (dry) cleaning. It must not melt or become
distorted under wet (dry) cleaning or pressing.
3.3.5 Reinforcement disc. The reinforcement discs for buttons
secured to the side seam, with ring toggles, shall be punched
from the cloth, cotton, buckram specified in 3.3.4. The
reinforcement discs shall be 7/8 inch in diameter with a 1/8 inch
diameter hole at the center.
3.3.6 Coat fronts. The coat fronts shall conform to the
requirements of class 1 of MIL-DTL-82114.
3.3.7 Shoulder pads. The shoulder pads shall conform to the
requirements of type I, class 2 of MIL-P-15064.
3.3.8 Sleeve-head pads. The sleeve-head pads shall conform to
the requirements of type IV of MIL-P-15064.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business