MIL-DTL-82189C(MC)
3.3.9 Stay tape. The stay tape for the armhole shall be cotton,
unbleached, 1/4 inch wide, conforming to type II, class 1 of
A-A-52071, except the requirement for non-fibrous material shall
not apply.
3.3.10 Piping. The piping materials for the front and bottom
edges of the coat and the ornamental back patch shall be cut
1-1/8 inches wide and shall conform to the following:
3.3.10.1.Class 1. Cloth, wool, tropical, scarlet, shade 2502,
10.5 ounce, conforming to type I, class 1 of MIL-C-21115.
3.3.10.2.Class 2. Cloth, polyester and wool, tropical, black,
shade 2607, 8.5 to 9.5 ounce, conforming to type III of
MIL-C-21115.
3.3.11 Binding. The binding for the collar interlining shall be
cut one inch wide from the following materials:
a.
Upper edge of collar interlining - cloth,
polyester/wool blend as specified in 3.3.10.
b.
Lower edge of collar interlining and underarm shields -
cloth, polyester or polyester blend as specified in 3.3.3.
3.3.12 Wigan. The material for reinforcing the bottom edge of
the sleeves shall be cloth, cotton, wigan, 2.5 ounces, conforming
to A-A-52097.
3.3.13 Threads.
3.3.13.1.Silk thread. The silk thread shall conform to A-A-50196
as follows, except the requirements for extractable material
shall not apply.
Use
Type
Class
Ticket No.
Ply
Bartacks and all outside
I
-
A
-
seaming and stitching.
Machine felling.
-
-
O
-
Making buttonholes in coat.
I
-
B and F
3
Hand felling; and hand sewing.
III
3
C
2
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business