MIL-DTL-82172D(MC)
3.3.8 Shoulder pads. The shoulder pads shall conform to the
requirements of type I, class 2 of MIL-P-15064.
3.3.9 Sleeve-head pads. The sleeve-head pads shall conform to
the requirements of type IV of MIL-P-15064.
3.3.10 Stay tape. The stay tape for the armhole shall be
cotton, unbleached, 1/4 inch wide, conforming to type II, class 1
of A-A-52071, except the requirement for nonfibrous material
shall not apply.
3.3.11 Piping. The piping material shall be cloth,
polyester/wool blend, black, shade 2607, conforming to type III
of MIL-C-21115, cut 5/8 to 3/4 inch wide for piping the shoulder
straps, collar, or ornamental sleeve patches (class 1 only); and
1 inch wide for piping the front and bottom edges of the coat.
3.3.12 Binding. The binding for the collar interlining shall be
cut 1 inch wide from the following materials:
a.
Upper edge of collar interlining - cloth, polyester/
wool blend as specified in 3.3.11.
b. Lower edge of collar interlining - cloth, polyester and
cotton as specified in 3.3.3.
3.3.13 Wigan. The material for reinforcing the bottom edge of
the sleeves shall be cloth, cotton, wigan, 2.5 ounces, conforming
to A-A-52097.
3.3.14 Threads.
3.3.14.1. Silk thread. The silk thread shall conform to
A-A-50196 as follows; except the requirements for extractable
material shall not apply:
Use
Type
Ticket No.
Ply
Bartacks and all outside seaming
I
A
-
and stitching.
-
0
-
Machine felling
I
B and F
3
Making buttonholes in coat.
2
Hand felling; and hand sewing.
III
C
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business