MIL-DTL-82172D(MC)
3.3.2 Lining. The material for lining the coats and collar and
for making the underarm shields, collar eyelet covers, coat
hanger and straps to secure the lining to the bottom edge of the
coat shall be cloth, rayon twill, scarlet, shade 2506 (see 6.3),
conforming to class 1 of MIL-C-368.
3.3.3 Cloth, twill or plain weave polyester or polyester blend.
The stays for the armhole and shoulder seams, reinforcement
pieces for the collar eyelets, bindings for the lower edge of the
collar, and neck edge of the coat front interlining shall be cut
from cloth, polyester or polyester blend, conforming to
A-A-52106, except the requirement for nonfibrous material and
seam efficiency shall not apply. The polyester or polyester
blend shall be khaki, shade 3707 for the armhole and shoulder
seam stays, the collar eyelet reinforcement pieces and the
binding for the neck edge of front interlining; and black for the
binding for the lower edge of the collar interlining.
3.3.4 Collar interlining. The material for the collar
interlining shall be cloth, cotton, buckram, double texture,
laminated, starch finish, natural color, conforming to type IV of
A-A-50186. The weight of the laminated cloth shall be 21 to 23
ounces per square yard.
3.3.4.1. Plastic. The plastic strip used in the collar
interlining shall be clear plastic stock, 0.020 inch thick.
It
shall be cut using the cotton buckram pattern.
3.3.4.2. Plastic interlining. The plastic interlining must
withstand wet (dry) cleaning. It must not melt or become
distorted under wet (dry) cleaning or pressing.
3.3.5 Reinforcement disc. The reinforcement discs for buttons
secured to the side seam, with ring toggles, shall be punched
from the cloth, cotton, buckram specified in 3.3.4. The
reinforcement discs shall be 7/8 inch in diameter with 1/8 inch
diameter hole at the center.
3.3.6 Padding for collar. The material for padding the collar
shall be suitable cotton felt, white, weighing 4.25 to 4.75
ounces per square yard.
3.3.7 Coat fronts. The coat fronts shall conform to the
requirements of class 1 of MIL-DTL-82114.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business