MIL-DTL-82172D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH TYPE
BOB/
NO
OPERATION
TYPE
STCH/IN
NDL
LPR
Shade marking.
3
(cont'd)
b. The use of tickets with any metal
fastening devices is prohibited on
the rayon lining.
Make coat hanger and lining securing
4
straps.
Finished appearance. The coat hanger
and lining securing straps shall
finish 1/4 to 3/8 inch wide.
a. Fold the 1-1/8 inch wide strip of
301
EFp-1
12-16
A
A
lining material in half lengthwise.
Turn the edges to the inside and seam
1/16 inch from the turned edges.
b. Cut the coat hanger 3-3/4 + 1/4
inches long.
c. Cut the lining securing straps
4-1/2 + 1/4 inches long.
5
Make collar eyelet covers.
Finished appearance. The collar
eyelet covers shall finish 1-3/4 +
1/8 inches wide.
a. Turn under the side edges of the
301
EFa-1
12-16
A
A
collar eyelet covers. Stitch 1/16 to
(each
1/8 inch from the folded edges,
side
edge)
catching the turned under portions in
the stitching.
b. Fold each cover in half across
301
SSa-1
12-16
A
A
the width. Seam 1/16 to 1/8 inch
from the folded side edges.
6
Make underarm shields.
Finished appearance. The shields
shall be finished smooth and flat
without puckers, pleats, gathers, or
other distortions.
a. Position the two plies of
301
SSa-1
12-16
A
A
material for the underarm shields
with edges even. Seam the two plies
together along the curved side and
bottom edges 3/8 inch from the edges.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business