MIL-DTL-82149C(MC)
DDD-L-20. The coats are intended to be wet (dry) cleaned and the
labels shall show fastness to wet (dry) cleaning.
3.3.19.1.Combination identification/instruction label. The
combination identification/instruction label shall conform to
type VI, classes 1 and 3 (combined) of DDD-L-20, except all
printing and the space between lines of printing shall be a
minimum of 10 point (approximately 1/8 inch). The content and
format shall be as follows:
Nomenclature:
Contract number:
Name of contractor:
Wool Products Act information:
DRY CLEAN ONLY
3.3.19.2.Size label. The size label shall conform to type VI,
class 2 of DDD-L-20. The label shall consist of the numerical
size designation specified in 1.2 followed by the letter S
(short), R (regular), L (long), or XL (extra long), as shown by
the following example:
40 R
3.4. Design. The coat shall be the U.S. Marine Corps design
shown in Figures 1 through 4, a semiformfitting, single-breasted
fully lined coat with 14 gold plated insignia buttons on the
right front and seven on the left front, having upper fronts,
with seven rows of black braid, skirt type lower body parts with
waist darts, a waist seam, a three-piece back with two gold
plated insignia buttons at the waist, ornamental sleeve cuffs
with gold plated insignia buttons, a stand up collar with a hook
and eye front closure, metal eyelets and two cloth loops on each
shoulder for attaching the epaulets. The lower edges and ends of
the collar, the front and bottom edges of coat, the seam joining
the skirt to the center back and the top edge of the ornamental
sleeve cuff shall be piped with white cloth. The upper edge of
the collar shall be piped with white vinyl cord.
3.5. Patterns. Standard patterns shall be furnished to the
contractor by the Government. The standard patterns shall not be
altered in any way and shall be used only as a guide for cutting
the contractor's working patterns. The contractor's working
patterns shall be identical to the standard patterns. The
standard patterns shall provide a 3/4 inch allowance for side
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business