MIL-DTL-82149C(MC)
3.3.16 Ornamental braid. The ornamental braid for the front of
the coat shall be mohair, black, tubular, 3/8 + 1/16 inch wide,
conforming to the following:
Plain
Weave
Weight per gross yards, ounces
35 minimum
Picks per inch
9 minimum
Total carriers
16 minimum
Ends per carrier
6 minimum
Breaking strength, pounds
105 minimum
Shrinkage:
- length, percent
2.0 maximum
- width, inches
Not less than the
original width
Colorfastness to:
- wet (dry) cleaning
Good
- light
Good
3.3.17 Buttons.
3.3.17.1.Insignia buttons. The insignia buttons shall be metal,
gold plated, enlisted design, 27-line and 40-line, conforming to
type I, style 3, class A, subclass 1 of MIL-DTL-3461.
3.3.17.2.Ring toggles. Ring toggles for securing buttons to
fronts, back and sleeves shall conform to MIL-DTL-3461.
3.3.18 Collar closure hook and eye. The hook and eye for closing
the collar shall be brass, black, japanned finish or black
chemical finish, followed by a clear lacquer coating and conform
to the requirements of Figure 9.
3.3.18.1.Eyelets. The eyelets for the collar shall be brass,
rolled flange type, with the barrel scored 6 to 8 scores. The
eyelets shall conform to MIL-E-20652, sheet 1A-BE108 and be
enameled in a black shade.
3.3.19 Labels. Each coat shall have a combination
identification/instruction label and a size label conforming to
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business