MIL-DTL-82149C(MC)
TABLE I.
Manufacturing requirements.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
1
Cutting.
a. Cut coats in strict accordance
with the patterns furnished by the
Government.
b. Cut all materials in the
direction indicated by the
directional lines on the patterns.
c. Cut all scarlet wool parts of the
coat from one piece of the basic
material.
d. Cut the body and collar linings,
collar eyelet covers and top ply of
underarm shields from one piece of
rayon lining material. All other
rayon lining parts may be cut from
ends. When pairs of sleeve linings
are cut from ends, the shade of the
lining shall match. Cut the strips
for the coat hanger and lining
securing straps 1-1/8 inches wide.
e. Cut the wool material for the
sleeve cuffs, and outer ply of collar
from the material specified in 3.3.2.
f. Cut the collar tab from the
material specified in 3.3.4.
g. Cut the twill or plain weave
polyester and polyester blend stays
for armhole and shoulder seams on the
bias 3/4 inch wide and 4 + 1/4 inches
long. Cut the polyester for binding
the neck edge of coat front
interlining on the bias, 3/4 inch
wide and approximately 5 inches long.
Cut the polyester for interlining
collar on the straight in accordance
with pattern furnished.
h. Cut the cotton buckram and
plastic strip for interlining the
collar on the straight in accordance
with the pattern furnished.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business