MIL-DTL-29389B(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
N
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
O
a. Position the adjustment straps
on the face side of the back (i.e.,
one strap at each side edge) with
the underside (seamed side) of the
straps facing down and the raw wide
end of the strap even with the raw
side edge of the back.
b. Stitch straps to back 1/8 to 1/4
301
SSa-1
10-14
A
A
inch from raw side edges.
1
Stitch adjustment straps to back.
7
(cont'd)
c. Stitch straps to back with a
301
SSv-1
10-14
A
A
single row of stitches across the
width of the straps through the seam
allowance of each back dart.
d. Position the back components
301
SSa-1
10-14
A
A
face to face, with edges even and
center seams matching, and joining
together along the bottom edge with
a 3/8 inch seam.
e. Turn the backs face side out and
press the seam smooth and flat with
a heated pressing iron or pressing
machine. The bottom seam shall not
be visible on the outside of the
adjustment strap side of the back.
1
Join facing-lining assemblies to
8
front with tapes.
Finished appearance. The facing-
lining assemblies shall be joined to
the fronts in such a way as to
product smooth and flat seams
without pleats, puckers or gathers
in the finished vest.
a. Position facing-lining assembly
on the outside of the respective
fronts, with the upper edge of neck
extension and front edges even.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business