MIL-DTL-82193C(MC)
Name:
Service number:
Collar size:
Nomenclature: (item description)
Contract number:
Name of contractor:
Wool Products Act information
3.3.14.2.Size label. The size label shall be type I, class 2.
The label shall consist of the numerical size designation
specified in 1.2 followed by the letters S, R, L, or XL for
Short, Regular, Long and Extra Long, as shown by the following
example:
40R
3.3.15 Collar closure hook and eye. The hook and eye for closing
the collar shall be brass, black japanned finish, conforming to
the requirements herein, and the following:
3.3.15.1.Finish. All surfaces and edges of the hook and eye
shall be clean, smooth, free from burrs, tool marks, sharp edges,
and roughness. The hook and eye shall be black japanned lacquer.
The dry lacquer film shall be continuous, level, adherent, free
from lint, dust, or other foreign inclusions that may affect
appearance or serviceability, and shall withstand the test for
tackiness specified in Section 4, Table III. All apertures of
the finished lacquered hook and eye shall be completely open, and
free of any lacquer film.
3.3.16 Sleeve patches. The sleeve patches are fabricated in
accordance with MIL-DTL-82194. The sleeve patches are furnished
prefabricated with ornamentation. Sleeve patches are
prefabricated with ornamentation for company, field, and general
officers, and may be obtained either finished or unfinished, with
or without buttons attached.
3.3.17 Collar ornamentation. The ornamentation for the collar is
fabricated in accordance with MIL-DTL-82194. Standard width of
collar is 2 inches. Short length jackets require a 1-3/4 inch
collar.
3.3.18 Shoulder strap ornamentation. The ornamentation for the
shoulder strap is fabricated in accordance with MIL-DTL-82194.
The shoulder strap will be furnished prefabricated with
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business