MIL-DTL-82193C(MC)
TABLE I.
Manufacturing requirements - Continued.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Assemble collar.
6
(cont'd)
a. Position the polyester twill
301
SSa-1
10-14
A/3
A/3
collar interlining on the collar
(each
(cotton) (cotton)
interlining (buckram) with edges even
edge)
and seam together 3/16 to 1/4 inch
from each edge.
b. Trim the upper and lower edges
(basic cloth) of collar 5/8 to 3/4
inch and trim both ends of the collar
1 to 1-1/4 inches from the outer row
of the synthetic gold border.
c. Trim the upper and side edges
(ends) of the collar crinoline as
close as possible to the embroidered
thread.
d. Lap the upper edge of the collar
301
LSa-1
10-14
A/3
A/3
interlining assembly with the buckram
side up on the inside of the basic
material at the upper edge 1/8 to
3/16 inches from the crinoline edge
of collar. (The collar interlining
assembly shall be even with the
crinoline at both ends of collar) and
stitch together 1/8 to 3/16 inches
from the collar interlining raw edge.
The stitching shall extend the length
of the upper edge of collar
interlining assembly.
e. Turn the collar assembly right
side out with polyester twill side
up.
f. Position the upper raw edge of
301
SSa-1
10-14
A/3
A/3
scarlet lining even with the upper
(cotton) (cotton)
raw edge of collar. The lining shall
extend not less than 3/4 inch beyond
both ends of collar. The line of
stitching shall cover the stitching
of the interlining to the collar, and
shall extend 1 to 1-1/4 inches from
both ends of collar.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business