MIL-DTL-82193C(MC)
Shrinkage - percent (maximum):
warp and filling
2.0
3.3.7.3. Haircloth. The front body and the reinforcement piece
for the top front corner of the left and right and shoulder stay
for coat fronts shall be haircloth made with natural color, 2-ply
cotton yarn in the warp and natural horsehair in the filling.
The finished cloth shall have a minimum thread count of 60 per
inch in the warp and 40 per inch in the filling, shall weigh not
less than 4.5 ounces per square yard, and shall contain not more
than 1.0 percent of non-fibrous material.
3.3.8 Shoulder pads. The shoulder pads shall conform to type I,
class 2 of MIL-P-15064.
3.3.9 Sleeve-head pads.
The sleeve-head pads shall conform to
type IV of MIL-P-15064.
3.3.10 Tape, 3/8 inch. The tape for the front edges shall be 3/8
inch wide cotton, unbleached or bleached white, conforming to
type II, class 1 or class 2 of A-A-52071.
3.3.11 Thread.
3.3.11.1.Silk thread. The silk thread shall conform to
A-A-50196. The thread for machine sewing shall conform to type
I, ticket No. A for all outside seaming and stitching and ticket
No. 0 for machine felling; ticket No. B, 3-ply and ticket No. F,
3-ply top and lower thread, respectively for buttonholes as
indicated in the thread columns in Table I. The thread for hand
sewing shall be type III, ticket No. C, 2-ply. The requirements
for extractable material shall not apply.
3.3.11.2.Cotton thread. The cotton thread shall conform to
A-A-52094 type III, mercerized finish, ticket No. A, 3-ply for
all inside seaming and stitching; type II, glazed finish, ticket
No. 24, 4-ply for sewing on buttons. Soft finish cotton thread,
type I, ticket No. 70, 2-ply shall be used for seaming and
stitching the assembled parts of the coat fronts together and
ticket No. 30, 3-ply shall be used for machine tacking of the
armholes. As an alternate for cotton thread, a polyester cotton
covered thread conforming to A-A-50199, ticket No. 50, 2 or 3-ply
may be used. The thread for basting shall be a good commercial
grade.
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business