MIL-DTL-82168C(MC)
Width
3/8 + 1/16 inch minimum
Weight/linear yard
154.5 grams
Metal content (%)
Gold
0.3 minimum
Silver
0.6 minimum
Copper
Remainder (traces of nickel
and zinc)
Fastness to
WaterGood
Wet (dry) cleaning
Good
3.3.15.2. Collar gold lace. The gold lace for the collar and the
lower stripe of the sleeves shall conform to type II, class 1,
style A of MIL-L-17507.
3.3.16 Collar closure hook and eye. The hook and eye for
closing the collar shall be brass, black, japanned finished or
black chemical finish, followed by a clear lacquer coating and
conform to the requirements of Figure 10.
3.3.16.1. Eyelets. The eyelets for the collar shall be brass,
rolled flange type, with the barrel scored six to eight scores.
The eyelets shall conform to MIL-E-29652, sheet 1A-BE108 and be
enameled a black shade.
3.3.17 Labels. Each coat shall have a combination
identification/instruction label and a size label conforming to
DDD-L-20. The coats are intended to be wet (dry) cleaned and the
label shall show fastness to wet (dry) cleaning.
3.3.17.1. Combination instruction/identification label. The
combination instruction/identification label shall conform to
type VI, classes 1 and 3 (combined) of DDD-L-20, except all
printing and the space between lines of printing shall be a
minimum 10 point (approximately 1/8 inch). The content and
format shall be as follows:
Nomenclature:
Contract number:
Name of contractor:
Wool Products Act information:
DRY CLEAN ONLY
8
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business