MIL-DTL-82168C(MC)
TABLE I.
Manufacturing requirements.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
1
Cutting.
a. Cut coats in strict accordance
with the patterns furnished by the
Government.
b. Cut all materials in the
direction of the warp as indicated by
the directional lines on the
patterns.
c. Cut all scarlet wool parts of the
coat from one piece of the applicable
material (see 3.3.1).
d. Cut the body and collar linings,
collar extension tab, the collar
eyelet covers, and underarm shields,
from one piece of rayon lining
material. All other rayon lining
parts may be cut from ends. When
pairs of sleeve linings are cut from
ends, the shade of the lining shall
match. Cut the strips for the coat
hanger and lining securing straps
1-1/8 inches wide.
f. Cut wigan for the sleeve bottom
and sleeve ornament on the bias in
accordance with the pattern.
g. Cut the cotton buckram and
plastic strip for interlining the
collar on the straight in accordance
with the patterns furnished.
h. Cut the material (see 3.3.10) for
piping the front and bottom edges of
the coat, and the seam joining the
skirt to the center back, on the
straight. The piping shall be cut
1-1/8 inches wide.
i. Punch the reinforcement disc for
buttons secured to the skirt back
seam from cloth, cotton, buckram.
The reinforcement disc shall be 7/8
inch in diameter with a 1/8 inch
diameter hole at the center.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business