MIL-DTL-82168C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
10 Make collar extension tab.
Finished appearance. The collar
extension tab shall finish smooth and
flat without twists, puckers, pleats,
or distortions. The stitching shall
be uniform gage.
a. Turn the top and bottom edges,
Hand
and the end of the collar lining at
the left end of the collar, to the
outside of the lining. Baste the
turned portion along the top, front,
and bottom edges to the body of the
lining, forming the collar extension
tab.
b. Stitch the collar extension tab
301
SSe-1
12-16
A
A
1/16 inch from the top, front, and
(top and
(silk)
(silk)
bottom edges. Continue the stitching
bottom)
at the back of the tab to the top
OSf-1
row, forming a 1-1/8 inch wide box
(front
stitch. The finished tab shall
edge)
extend 3/4 to 7/8 inch beyond the
SSa-1
front edge of the collar.
(back
edge)
c. Attach metal eyelet through all
plies of the collar, midway between
the upper and bottom edge and 1-1/2 +
1/8 inches from the folded end of
collar.
11 Stitch and press dart in under
sleeves.
a. Fold the under sleeve, matching
301
SSa-1
12-16
A
A
the cut edges of the sleeve darts.
(cut
Stitch the entire length of the dart,
edge)
1/4 inch from the cut edges of the
OSf-1
armhole, tapering the line of
(folded
stitching to zero at the lower folded
edge)
edges.
b. Spread open the cut edges of the
dart and turn the lower folded edge
flat against the body of the under
sleeve. Press the entire dart smooth
and flat with a heated pressing iron.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business