MIL-DTL-82163D(MC)
pockets with pocket flaps to button, style A only; outlet from
crotch to knee at inseam and unfinished leg bottom.
3.5. Patterns. Standard patterns will be furnished to the
contractor by the Government. The standard patterns shall not be
altered in any way and shall be used only as a guide for cutting
the supplier's working patterns. The standards patterns shall
provide a seam allowance of 3/8 inch for inseams and outseams and
5/8 inch for crotch seam, and allow a seat outlet at the waist in
accordance with patterns. The standard patterns provide a four
inch allowance for bottom turnup of legs. The standard patterns
show size, directional lines for cutting, and are marked and
notched for proper placement and assembly of the component parts.
3.5.1 List of pattern parts. Trousers shall be cut from the
materials specified in accordance with the pattern parts
indicated below:
ITEM
PATTERN NOMENCLATURE
NO. OF CUT
PARTS
Material: Basic
1
Front
2
2
Back
2
3
Right fly
1
4
Left fly
2
5
Side pocket (facing wide)
2
6
Side pocket (bearer narrow)
2
7
Bearer and cord facing, hip pocket
(style A)
4
Flap, hip pocket (style A)
8
4
Waistband
9
2
Belt loop strip
10
1
11
Fly tab
2
Material: Cloth, twill or plain weave,
polyester/cotton
12
Side pocket
2
13
Hip pocket (style A)
2
14
Fly lining, right
1
15
Stay, side pocket
2
16
Waistband interlining
2
17
Left fly interlining
2
18
Crotch lining
2
19
Pocket flaps (style A)
2
Material: Cloth, buckram, cotton
20
Waistband interlining
2
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business