MIL-DTL-82163D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
b. Position the bearer on the
pocket material in accordance with
notches indicated on the pattern.
c. Fold under the lower raw edge
301
LSd-1
12-16
A/3
A/3
of bearers 1/4 to 3/8 inch and
or
stitch to the pocket 1/8 inch from
LSbj-1
the folded edge. A selvage edge
need not be turned.
13 Make waistband lining.
Finished appearance. The waistband
lining shall be without distortion.
The waistband lining shall finish
2-1/4 + 1/8 inches wide.
a. The waistband lining shall be
made of one ply of lining and one
ply of buckram.
b. Overlap lining on buckram 3/4
301
LSa-1
6-10
A/3
A/3
inch and stitch 1/8 to 3/16 inch
or
from edge of lining. Fold lining
401
over buckram and press.
c. Position stabilizer on
301
SSa-1
6-10
A/3
A/3
interlining with one edge of
stabilizer and free edge of
interlining even. Stitch
stabilizer to interlining 1/2 inch
from edge.
d. Use commercial buckram
interlined waistband lining,
provided the finished waistband
conforms to the requirements
specified herein (see 3.3.2 and
3.3.3).
14 Seams darts in back.
Finished appearance. The darts
shall be properly positioned and
finished without pleats, puckers,
or gathers. In the finished
trousers, the dart shall be well
tapered to a flat point at lower
end and shall extend to the pocket
opening in style A.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business