MIL-DTL-82163D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
a. Fold the hip darts in
301
OSf-1
12-16
A/3
A/3
accordance with the notches and
stitch the length of the darts.
The folded edge of darts shall be
turned and pressed towards the seat
seam.
15 Attach hip pockets and flap (style
A).
Finished appearance. The pockets
shall finish smooth and flat
without bulkiness, bulges or other
distortions on the outside of the
finished trousers. The stitching
shall be uniform and secure. The
pocket openings and flaps shall be
in proper alignment.
a. Properly position the pocketing
301
LSq-2
12-16
A/3
A/3
on the underside and the flap on
the outside of the back of the
trousers in line with the mark for
the pocket opening indicated by the
pattern. Seam the flap to trousers
through the pockets 3/16 to 1/4
inch from the mark.
b. Position the cord facing with
301
SSe-2
12-16
A/3
A/3
the upper edge placed under the raw
(a)
edge of flaps and abutting the flap
seam. Seam the cord facing to the
trousers and through pocketing 3/16
to 1/4 inch from the raw edge of
the cord facing. The seam shall
not extend beyond the flap.
c. Cut the opening for the pocket
301
SSe-1
12-16
A/3
A/3
through the pocketing midway
between the two seams. Turn the
lower part of facing through the
opening and raise stitch, forming a
1/8 to 3/16 inch cord edge.
d. Turn in the bottom raw edge of
301
LSd-1
12-16
A/3
A/3
the cord facing and seam to pocket
1/16 to 1/8 inch from folded edge.
A selvage edge need not be turned.
e. Fold pocket inside out,
301
SSae-2
12-16
A/3
A/3
matching notches with pocket
(a)
opening, and seam side raw edges.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business