MIL-DTL-82163D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
10 Assemble right and left flies.
Finished appearance. The flies
shall be even at the lower end
where they join the crotch seam.
The fastener parts shall be set so
that there is no twisting or
puckering when fly is closed.
10 Assemble right and left flies.
(cont'd)
a. Position flies with notches at
301
SSa-1
12-16
A/3
A/3
lower end matching and seam
fastener tape to back edge of right
fly, stitching 1/4 inch from edge.
11 Set side pocket bearers and
facings.
Finished appearance. The pocket
bearer and facing shall be properly
positioned and securely sewn with
stitching of uniform gage and
without pleats, puckers, or other
distortions.
a. The side pocket bearers and
facing shall each be a single piece
of basic material.
b. Position the bearer and facing
on the pocket material in
accordance with notch indicated on
the pocket pattern.
c. Fold under the front raw edges
301
LSd-1
12-16
A/3
A/3
of bearers and facings 1/4 to 3/8
or
inch and stitch to the pocket 1/8
LSbj-1
inch from the folded edge; continue
stitching across the bottom raw
edge. A selvage edge need not be
turned.
12 Set hip pocket bearers (style A).
Finished appearance. The pocket
bearers shall be properly
positioned and securely sewn with
stitching of uniform gage and
without pleats, puckers, or other
distortions.
a. The back pocket bearer shall be
a single ply of basic material.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business