MIL-DTL-82163D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
16 Attach side pockets.
(cont'd)
f. Fold the pocket right side in.
301
SSe-2
12-16
A/3
A/3
Seam raw edges 3/16 to 1/4 inch
(a)
from edges from step to bottom and
continue along the bottom edge.
Notch pocket bearer and facing at
top of step and turn.
g. Securely tack both ends of the
301
SSa-1
12-16
A/3
A/3
pocket opening through the front
and bearer with a 1/4 to 3/8 inch
tack.
h. In the finished trousers, the
top of the pockets shall extend
into the waistband and be caught in
the bottom stitching of the
waistband lining.
i. The finished pocket opening
(after bartacking) shall measure
6-1/2 + 1/4 inches.
17 Join fly assembly to fronts.
Finished appearance. The seam
join- ing the fly assembly to the
fronts shall be without pleats,
puckers, twists, or other
distortions.
a. Sew on left fly with 3/8 inch
301
SSa-1
12-16
A/3
A/3
seam with notches matching. Turn
fly to the inside with the seam
1/16 to 1/8 inch back of folded
edge and press front edge without
damages to the fastener.
b. Sew on right fly with 3/8 inch
301
LSq-2
12-16
A/3
A/3
seam with notches matching and with
(a)
slide fastener tape caught in the
stitching.
c. Press right fly seam open and
flat with a heated pressing iron
with the fastener tape facing
toward side seam.
19
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business