MIL-DTL-82163D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
15 Attach hip pockets and flap (style
A). (cont'd)
f. Turn pocket, forcing out
301
SSae-2
12-16
A/3
A/3
(b)
corners. Fold the sides above the
(sides
pocket opening and stitch 3/16 to
1/4 inch from the folded edge.
OSf-1
Continue to stitch along the sides
bottom)
and across the bottom folded edge.
The ends of the bearer and cord
facing shall be caught in the edge
stitching only.
g. Turn down the flap and raise
301
LSq-2
12-16
A/3
A/3
stitch the upper edge of the pocket
(b)
opening through the back, flap,
pocket and facing 1/16 inch from
the seam, closing top of pocket.
h. Seam identification-size
301
SSa-1
12-16
A/3
A/3
instruction label on four sides to
(each
left pocket on the outer side of
edge)
the material for class 1, styles A
and B, trousers. Position of label
on finished trousers shall be
between lower edge of waistband
lining and location of pocket
opening.
i. Securely tack both ends of the
301
SSa-1
12-16
A/3
A/3
pocket opening through all plies of
material.
j. The depth of the pockets shall
be 5-3/4 to 6-1/4 inches when
measured on the inside of the
pocket from top edge of the cord
facing bottom.
k. The finished pocket opening
(after bartacking) shall not exceed
the hip pocket flap.
l. On the finished trousers, the
pocket flaps shall be 2-1/4 + 1/4
inches at center measured from seam
to center point.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business