MIL-DTL-21083E(MC)
ITEM
PATTERN NOMENCLATURE
NO. OF CUT PARTS
Material:
Polyester/cotton twill
27
Inside breast pocket
1
28
Inside breast pocket stay
1
29
Stay, upper pocket
2
30
Stay, lower pocket
2
31
Lining, upper pocket
2
32
Lining, lower pocket
2
Material:
Cloth, cotton interlining
33
Collar interlining
1 or 2
34
Belt interlining
1
Material:
Cloth, wool, flannel
35
Under collar
1 or 2
36
Sword slit patch
1
Shapers
Working lapel shaper
Finished color and lapel shaper
Under collar shaper
Finished pocket shaper, upper
Finished pocket shaper, lower
Finished pocket flap shaper, upper
Finished pocket flap shaper, lower
Left vent shaper
Markers
Sleeve cuff marker
Under collar stand marker
Inside breast pocket marker
3.6. Construction. The coats shall be manufactured in accordance
with the operations and the stitch, seam and stitching types
specified in Table I. The contractor is not required to follow
the exact sequence of the operations as listed in Table I, but
all operations specified shall be used to manufacture the coats.
3.6.1 Stitches, seams and stitchings. The stitch, seam, and
stitching types specified in Table I shall conform to
FED-STD-751. The number of stitches per inch as specified in
Table I indicates the minimum and maximum number permitted. All
overedge stitching shall be done on serging machines with a knife
attachment properly set to trim the reveled edge without cutting
the material.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business