MIL-DTL-82161C(MC)
2.4. Order of precedence. In the event of a conflict between the
text of this document and the references cited herein, the text
of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a
specific exemption has been obtained.
3.
REQUIREMENTS
3.1. Standard sample. Standard samples are furnished solely for
guidance and information to the contractor (see 6.3). Variations
from this specification may appear in the sample, in which case
the specification shall govern.
3.2. First article. When specified (see 6.2), a sample shall be
subjected to first article inspection in accordance with 4.3.
3.3. Materials.
3.3.1 Basic material. The basic material and reinforcement
patches for the leg bottoms shall be cloth, wool, broadcloth,
dark blue, shade 2307, conforming to type I of MIL-C-29405.
3.3.2 Lining. The material for lining the waistband and right
fly shall be cloth, rayon, twill, black, 3.7 ounce, conforming to
class 1 of MIL-C-368.
3.3.3 Pocketing, lining, and interlining. The material for
lining the pockets, waistband, right fly, pocket flaps, crotch,
left fly interlining, and pocket stay shall be black polyester,
polyester and cotton or polyester and rayon conforming to class 1
of A-A-52106.
3.3.4 Buckram. The material for interlining waistbands shall be
cloth, buckram, cotton, natural shade, conforming to type I of
A-A-50186.
3.3.5 Stay tape. The tape for the front edge of the side pocket
shall be cotton, 1/4 inch wide, conforming to type II, class 1 of
A-A-52071.
3.3.6 Hook and eye. The hook and eye shall be North and Judd
(Hook Flex H-49, K-50, H-89 and E-90); Universal Button Co.
(Talon #3, #7 and #8 hook with #8 eye or #85 eye); Akim Co. or
Patwin, Inc., Junior Series, type JB; Stimpson (P-536, D-4086,
D-4457, D-4288); Rau (OA50, OX 1256, 080416), Patwin, Inc.
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business